product range

<< back to productsSelfCoat Sealer



SelfCoat Sealer

Application

All joints, cracks, and surfaces must be sound, clean, and dry. Grease, oil, laitance, previous waterproofing, or damp proofing materials and other contamination must be thoroughly removed. Cleaning may be done by wire brush or sandblasting. SEALER can be applied by brush, conventional caulking equipment. Ensure that the sealant is firmly filled into the joints or cracks to give the full strength. For shrinkage cracks or cracks that occur more than 2 mm wide SEALER mixed with washed sand is recommended. SELFCOAT BIND MUST BE APPLIED BEFORE APPLICATION.